Lab - Manual

SPPU CN-Practicals (TE-Comp)
 

LIST OF LAB EXPERIMENTS

Lab Expt. No.	Problem Statement
A1.	Part A: Setup a wired LAN using Layer 2 Switch and then IP switch of minimum four computers. It includes preparation of cable, testing of cable using line tester, configuration  machine using IP addresses, testing using PING utility and demonstrate the PING packets  captured traces using Wireshark Packet Analyzer Tool. Part B: Extend the same Assignment for Wireless using Access Point
A2.	Write a program in C/C++  for error detection and correction for 7/8 bits ASCII codes using Hamming  Codes or CRC. Demonstrate the packets captured traces using Wireshark Packet Analyzer  Tool for peer to peer mode. ( 50% students will perform Hamming Code and others will  perform CRC)
A3.	Write a program  in Java/Python to demonstrate sub netting and find the sub net masks.
A4.	Installing and configure DHCP server and write a program (C++\Python\Java) to install the software on remote machine.
A5.	Write a program  in C/C++ using UDP Sockets to enable file transfer (Script, Text, Audio and Video  one file each) between two machines. Demonstrate the packets captured traces using  Wireshark Packet Analyzer Tool for peer to peer mode.
A6.	Write a program in C/C++  using TCP socket for wired network for following a. Say Hello to Each other ( For all students) b. File transfer ( For all students) c. Calculator (Arithmetic) (50% students) d. Calculator (Trigonometry) (50% students) Demonstrate the packets captured traces using Wireshark Packet Analyzer Tool for peer to peer mode.
A7.	Write a program in C/C++ to analyze following packet formats captured through Wireshark for wired  network. 1. Ethernet 2. IP 3.TCP 4. UDP
A8.	Write a program in Java/Python to simulate the behaviour of link state routing protocol to find suitable path  for transmission.
B1	Study of any network simulation tools - To create a network with three nodes and establish a  TCP connection between node 0 and node 1 such that node 0 will send TCP packet to node 2  via node 1
B2.	Use network simulator NS2 to implement: a. Monitoring traffic for the given topology b. Analysis of CSMA and Ethernet protocols c. Network Routing: Shortest path routing, AODV. d. Analysis of congestion control (TCP and UDP).
B3.	Configure RIP/OSPF/BGP using packet Tracer.
B4.	Write a program using UDP sockets for wired network to implement a. Peer to Peer Chat b. Multiuser Chat Demonstrate the packets captured traces using Wireshark Packet Analyzer Tool for peer to  peer mode